Brighton D has outstanding affinity and highly suitable for fluorescent whitening in the furnish at slightly acid or neutral ph. Broadly not affected by cationic substance. It can readily be used with mechanical pulp or secondary fiber.
Brighton T is a versatile tetrasulpho type optical whitening agent. It is used in wet end , size press and coating application in paper. It is preferably in corporated in coating mixer together with starch. Brighton T liquid produces high brightness in acidic and cationic medium.
Brighton H Liquid is a hexa sulphonic type florescent brightening agent which is used in surface coating and size press liquor in paper industry. It gives best whiteness and brightness in treated papers. It can used in alkali, neutral and acidic condition so, there is no bound of Ph for this product.
With its outstanding properties, ABSTRACT WHITE HIGH CONC. TETRA SULPHONIC POWDER can be used universally for brightening sized and filled papers. Its good resistance to acids and sizing ensure problem- free processing even at low pH values. ABSTRACT WHITE HIGH CONC. TETRA SULPHONIC POWDER can be added to the pulp in amounts of up to 0.2 TO 0.4 %. ABSTRACT WHITE HIGH CONC TETRA SULPHONIC POWDER should preferably be used in dissolved form. However, the good solubility of the product means that the granules can also be scattered into the pulper or machine chest provided they are then mixed in thoroughly. To obtain an optimum brightening effect in sized papers, it is advisable to monitor the quantum of fluorescent whitening agent before the aluminum sulphate or other cationic additives.
ABSTRACT WHITE HIGH CONC. TETRAS ULPHONIC POWDER is highly suitable for surface brightening in the presence of starch. ABSTRACT WHITE HIGH CONC. TETRAS ULPHONIC POWDER should be used for high white qualities.
Good brightening effects are also obtained with ABSTRACT WHITE HIGH CONC. TETRA SULPHONIC POWDER in pigmented coatings with starch, CMC and polyvinyl alcohol as carriers. The addition is normally not more than 0.3 %.
With its outstanding properties, ABSTRACT WHITE HIGH CONC. TETRA SULPHONIC POWDER can be used universally for brightening sized and filled papers. Its good resistance to acids and sizing ensure problem- free processing even at low pH values. ABSTRACT WHITE HIGH CONC. TETRA SULPHONIC POWDER can be added to the pulp in amounts of up to 0.2 TO 0.4 %. ABSTRACT WHITE HIGH CONC TETRA SULPHONIC POWDER should preferably be used in dissolved form. However, the good solubility of the product means that the granules can also be scattered into the pulper or machine chest provided they are then mixed in thoroughly. To obtain an optimum brightening effect in sized papers, it is advisable to monitor the quantum of fluorescent whitening agent before the aluminum sulphate or other cationic additives.
ABSTRACT WHITE HIGH CONC. TETRAS ULPHONIC POWDER is highly suitable for surface brightening in the presence of starch. ABSTRACT WHITE HIGH CONC. TETRAS ULPHONIC POWDER should be used for high white qualities.
Good brightening effects are also obtained with ABSTRACT WHITE HIGH CONC. TETRA SULPHONIC POWDER in pigmented coatings with starch, CMC and polyvinyl alcohol as carriers. The addition is normally not more than 0.3 %.
Cooking aid also known as pulping aid. Compound used in cooking process for improving the mass transfer of pulping chemicals i.e. alkali and by products during cooking process.
ABSTRACT ACS is formulator compound designed for better cooking of pulp.
ABSTRACT ACS works not only as a catalyst but also provides high degree of wetting and penetration in highly alkali medium and controls the reaction of alkali.
Highly compatible with Alkali.
Act as a powerful wetting agent in highly alkaline medium. Increase the rate of penetration of alkali.
Catalyses the reaction.
Controls the drastic reaction of alkali. Hence protect the fiber from detorietion to short of fine fibers.
Low generation of short fibers
Increase in retention and decrease in rejection.
Increase yield of pulp
Quality of cooking improved
Reduces requirement of alkali and reducing agent.
Improves washing property.
Improves machine run ability.
The ration of agro to waste can be increase.
The defoamers used for papermaking process are mainly made from higher aliphatic alcohol and its derivatives.
OUR DEFOAMERS are chemically designed to prevent the formation of foam.
ABSTRACT DEFOAMERS breaks existing foam.
ABSTRACT DEFOAMER is added to the solution prior to foaming symptoms occurring The efficiency of abstract defoamer is dependent upon the bulk solution chemistry, operating conditions and surface active agents (surfactants) creating the foam.
Function: To cause foam bubbles to coalesce to the point where they are large enough to float harmlessly to the water surface and break.
DEFOAMING EFFICIENCY AT.015KPT
Figure 1: EFFICIENCY OF ABSTRACT DEFOAMER
Below Table has been provided by one of our customer of Paper Mill while they make a Laboratory Test of our Non Toxic Defoamer
| Time Second | HEIGHT OF FOAM | Other Defoamer | |
| Blank | Abstract non Toxidefoamer | ||
| 0 | 300 | 300 | 300 |
| 10 | 420 | 320 | 400 |
| 20 | 530 | 330 | 520 |
| 30 | 580 | 330 | 540 |
| 40 | 620 | 330 | 600 |
| 50 | 700 | 330 | 680 |
| 60 | 790 | 330 | 700 |
| Defoaming Efficiency % | - | 58.22 | 11.39 |
Based on above result, Non Toxic Defoamer is more effective paper machine defoamer compared to currently they use other defoamer. At same dosage of 0.15 kpt, Non Toxic Defoamer is 80.43 % more effective.
| Product Name | Application | Benefits |
| Abstract Non Toxic Defoamer (Ntd) | White water defoaming during formation of paper sheet |
|
| Abstract Silicon Defoamer (SD) | For wood bamboo, rice-wheat-straw, bagasse, and other type of pulp making |
|
| Abstract Af Paper Coating Defoamer | For paper coating |
|
| Product Name | Benefits | Addition Rate/Ton | Chemistry |
| Abstract D | Excellent Removal of Ink | 0.4 – 0.5 % | A Sodium Salt Of Selected Fatty Acid Based |
| Abstract HD | Enhanced collector chemical for flotation deinking | 0.4 – 0.5 % | A Sodium Soap Of Cps Plus A Synergistic Additive |
| Abstract Di Hc Liq | Excellent cost effective In The Removal of Ink and to Prevent Re deposition of Ink to The Cellulose Fiber | 0.05 – 0.2 % | Mixture Of Non-Ionic Surfactants And Dispersants |
| Abstract Bio Deinking Liq | Improve pulp bleach ability and brightness, reduce dirt count | 0.02 – 0.05 % | Proprietary Formulation Comprised Of Various Enzymes And Necessary Surface Active Components |
| End Market | Furnish/Waste Fibre Type |
| Newsprint | Mixtures Of old newsprint (100%-40%) and magazines (0-60%) |
| Tissue | (A) chemical fibre and (B) predominantly chemical fibre |
| Printing/ Writing | (A) chemical fibre (B) mechanical fibre and (C ) mixtures chemical fibre |
| Topliner | (A) chemical fibre |
| Testliner Chorma- Board | (A) mechanical fibre and (B ) mixtures chemical fibre |
| SALT FREE DIRECT DYES (LIQUID) | ACID DYES (LIQUID) | DIRECT DYES (POWDER) |
| Direct Yellow – 11 | Acid Orange – 7 | Direct Red - 9 |
| Direct Yellow – 44 | Acid Orange – 23 | Direct Blue - 201 |
| Direct Yellow 6 | Acid Yellow – 23 | Direct Blue - 290 |
| Direct Yellow - 107 / 132 | Acid Yellow – 36 | Direct Black - 168 |
| Direct Red – 81 | Acid Yellow – 42 | Direct Red - 83;1 |
| Direct Red – 239 | Direct Blue - 71 | |
| Direct Red – 254 | Direct Black - 179 | |
| Direct Orange – 39 | Direct Red - 227 | |
| Direct Orange – 15 | Direct Blue - 94 | |
| Direct Orange – 102 / 118 | Direct Blue - 160 | |
| Direct Blue – 14 – (2r) | Direct Blue - 273 | |
| Direct Blue – 15 | Direct Blue - 78 | |
| Direct Blue – 86 | Direct Red - 224 | |
| Direct Blue – 199 | Direct Yellow - 107 | |
| Direct Blue – 273 | Direct Yellow - 23 | |
| Direct Blue – 279 | ||
| Direct Blue – 301 | ||
| Direct Black – 168 | ||
| Direct Violet – 9 | ||
| Direct Violet – 35 | ||
| Direct Violet – 51 | ||
| Direct Brown – 44 | ||
| Sulphur Black - 1 |
ABSTRACT's dry strength programs offer papermakers another tool to manage end-product specifications, enhance operation profitability and develop new grades. The typical benefit of our dry strength program is improved strength properties and improved run ability. This gives you the option to increase machine speed, reduce basis weight, and to use lower cost fiber.
STRENGTHENING PROGRAMME
"Strengthening" should be used after Refining Machine Chest.
Primary Bonding mechanism responsible for Dry Strength involved the formation hydrogen bonds between Hydroxyl groups on adjacent fibers as water is removed from the shit.
Tensil`s strength in low density sheets determine by the number of fiber to fiber bond (crossover points). And the strength of individual fiber to fiber bond.
The use of "Super Bond" can improve compressed strength of individual fiber to fiber bonds through supplemental hydrogen bonding in areas of existing fiber crossovers.
| Product Name | Solid Content | Dosage | Benefits |
| Abstract Suber Bond | 25+1 | 3-5 KG Added to the machine chest after refining. |
|
| Abstract DSR | 16+1 | 3-5 KGS Added to the machine chest after refining. |
| Product Name | Concentration | Benefits |
| Abstract Micro Softener | Min 99% flaks form | Excellent flexiblity with extra smoothness and stain resistance |
| Abstract Micro Softener LIQ | 20% |
How to solve stiekies problem:
The best ways to deal with stickies include avoiding them, removing them during deinking of the wastepaper by using ABSTRACT STC 112 to the system to overcome their tackiness.
| Product Name | Application | Benefits |
| Abstract STC112 | Control and remove stickes from the pulp |
|